PROFILE DESIGN Supersonic/Ergo+/4525 SLC Aero Bars

The Supersonic/Ergo+/SLC series aerobars offer industry leading ergonomics, adjustability and low weight – maximizing your comfort and speed. The Supersonic is the top model of the Flyt series brackets – utilizing an innovative internal wedge clamp to securely hold the extension. It offers easier adjustments and a greater fit range than anything that came before it. It is now paired with the new Ergo+ armrest that takes the popular Ergo shape and adds 40mm of length as well as a new textured cushion. Features: Performance: - The Supersonic/Ergo+ platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments. Origin: - The supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made. Extensions: - Extension Shape: The 4525 slc extensions offer a 45deg lower and 25deg upper section. This allows the rider to choose between a low, short reach position or a high hands, stretched position for aerodynamics. - The 4525 slc offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. - The SLC extensions offer the same range of ergonomic options as the previous generation but the weight is halved. This also allows Di2 parts to be fitted inside the extension. - All the extensions have a 22.2mm diameter in the clamping area. - They are 400mm long and can be cut to size to suit nearly every rider. - They are drilled for rear-exit cable routing. Accessory Options: - The Supersonic bracket can be paired with the Supersonic BTA mount - specifically designed to give a secure, clean and adjustable bottle cage mount for this bracket. - Supersonic BTA mount - This bracket is compatible with the Profile Design Universal Riser Kits for fine tuning the aerobar stack. - Universal Riser Kits Specifications: - Bracket: Supersonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo+ / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 15mm steps - Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added) Tech Guide: Torque settings (all bolts are M6): - Bar Clamp: 6Nm - Extension Clamp: 5Nm - Armrest Bolts: 4.7Nm Weight: - Bracket: 272g - Armrest: 217g - Extensions: 138g - Total: 627g