SRAM XX1 Eagle AXS rear derailleur

The Eagle AXS rear derailleur is the brain of the group and was developed specifically for optimal switching performance with electric motor. The circuit under load and on rough ground now works even more precisely. This gives you even more confidence in the bike under extreme load and you can concentrate exclusively on the trail. For a better protection of the derailleur in falls provides the new Overload-Clutch. It decouples the rear derailleur under extreme loads for a short time, so that it can avoid the load and the electric motor is protected from damage. However, the rear derailleur immediately jumps back into the engaged gear. As an extremely positive side effect, the rear derailleur hanger and derailleur hanger are better protected in the event of falls. In addition, a 10-millimeter shorter rear derailleur arm protects the rear derailleur from contact with the ground. For more chain wrap and thus better shifting performance, the parallelogram has slid a little further forward. NOTE: - Contrary to the illustration, the rear derailleur will be delivered without a battery. Specifications: - Material cage: carbon composite / aluminum / titanium - Technology: X-Actuation, Cage Lock, Type 3.0 Roller Bearing Clutch, X-Sync - Gears: 12-speed - Cage: long version, rear cage in carbon - Roller blades: 12 teeth (top) and 14 teeth (bottom) X-Sync - Compatibility: SRAM XX1 and X01 Eagle AXS switching groups - Waterproof: yes (IP69K) - Weight according to manufacturer: n / a - Weight weighed: 375,8g (including battery)