WOLF TOOTH Drop ST Sram Boost oval chainring
Bestseller
- Product Code:
- 135565408
For partners
Log in to see the price
Properties
Other features
- Бренд
- Wolf Tooth
Performance
- Цвет
- Черный
Weight & dimensions
- Размер
- 32T
Description
Oval direct mount single chainring compatible with Sram crankset and Boost 3mm frame (148mm rear axle) and 52mm chainline.
Compatibility.
-For Boost frames:3mm offset and 52mm chainline or drivetrain compatibility with Super Boost bikes.
-Attachment via 3 bolts on the rear of the spider near the axle.
Use the same 3 original Sram screws to attach the Wolf Tooth chainring.
-Chain Compatibility:Drop-Stop ST for Shimano Hyperglide+ 12-speed and KMC 12-speed chains.
-With Praxis Works mountain cranks using 3mm offset.
-You will need clearance between the chainring and chainstay for a chainring two teeth larger than the elliptical chainring (maximum diameter is that of a chainring two teeth larger).
-If using a 9-speed drivetrain, use a 10-speed chain (shifts and works well on a 9-speed drivetrain and adjusts the ring tighter for better chain retention).
Not compatible.
-NOT compatible with SRAM 8-bolt direct mount cranksets.
-NOT compatible with other chains.
Chain Compatibility:Drop-Stop ST for Shimano Hyperglide+ 12-speed and KMC 12-speed chains.
Recommendations.
-The use of a clutch style rear derailleur is recommended for best chain security.
-A T25 Torx wrench is required to remove the bolts holding the chainring or spider to the crank.
-An L-wrench works best as the crank shaft may contact a bushing adapter and prevent proper engagement.
-Use the same 3 original Sram bolts to secure the Wolf Tooth crankset.
Features.
-Use:Mtb.
-Mounting:Direct Mount.
-Ovality:10%.
-Chain Compatibility:Drop-Stop ST.
-Weight according to sprocket:28t - 60g | 30t - 68g | 32t - 74g | 34t - 83g | 36t - g.
-Material:Aluminum 7075-T6.
-Made:in USA
Compatibility.
-For Boost frames:3mm offset and 52mm chainline or drivetrain compatibility with Super Boost bikes.
-Attachment via 3 bolts on the rear of the spider near the axle.
Use the same 3 original Sram screws to attach the Wolf Tooth chainring.
-Chain Compatibility:Drop-Stop ST for Shimano Hyperglide+ 12-speed and KMC 12-speed chains.
-With Praxis Works mountain cranks using 3mm offset.
-You will need clearance between the chainring and chainstay for a chainring two teeth larger than the elliptical chainring (maximum diameter is that of a chainring two teeth larger).
-If using a 9-speed drivetrain, use a 10-speed chain (shifts and works well on a 9-speed drivetrain and adjusts the ring tighter for better chain retention).
Not compatible.
-NOT compatible with SRAM 8-bolt direct mount cranksets.
-NOT compatible with other chains.
Chain Compatibility:Drop-Stop ST for Shimano Hyperglide+ 12-speed and KMC 12-speed chains.
Recommendations.
-The use of a clutch style rear derailleur is recommended for best chain security.
-A T25 Torx wrench is required to remove the bolts holding the chainring or spider to the crank.
-An L-wrench works best as the crank shaft may contact a bushing adapter and prevent proper engagement.
-Use the same 3 original Sram bolts to secure the Wolf Tooth crankset.
Features.
-Use:Mtb.
-Mounting:Direct Mount.
-Ovality:10%.
-Chain Compatibility:Drop-Stop ST.
-Weight according to sprocket:28t - 60g | 30t - 68g | 32t - 74g | 34t - 83g | 36t - g.
-Material:Aluminum 7075-T6.
-Made:in USA
