TERCOO Single Rotary Disc
Bestseller
- Product Code:
- 108367619
For partners
Log in to see the price
Properties
Other features
- Бренд
- Tercoo
Performance
- Цвет
- Коричневый
Description
About Tercoo.
Tercoo® is a rotating disc for the removal of rust, paint, tar, epoxy, paint, adhesives, etc.
from various materials such as steel, iron, concrete or stone.
The result is a sandblasted surface with the appropriate texture suitable for the application of a new protective coating.
Tercoo® provides the correct surface preparation for proper adhesion of new protective coatings.
How does Tercoo® work?.
Tercoo® is a natural rubber disc with 12 hard metal (tungsten carbide) tips (pins).
The tips are at a certain angle to the center of the disc.
During operation, the centrifugal force created by the rotational speed of the drill causes the flexible rubber disk to react in such a way as to create a ´´hammer effect´´ with the tungsten carbide tips.
This motion ensures that the tips clean the surface perfectly, removing all contaminants and other old coatings.
The hammer effect does not generate heat, so stubborn materials such as tar, adhesives and sealants will be easily removed.
This is a completely opposite concept compared to other tools.
Other tools use friction to remove contaminants (wire brush, etc.) which produce a lot of heat and work ineffectively with bitumen, tar, adhesives, tectil, etc.
based products.
In other words, no matter what the coating, Tercoo® is always clean.
Use and safety.
ALWAYS wear goggles, work gloves, dust masks and protective clothing.
Maximum speed 4000 rpm.
Optimal speed between 2500 and 3000 rpm.
DIRECTION = clockwise.
The disc should never be used on:
EDGES, HIGH SURFACES, etc.
Tercoo® is a rotating disc for the removal of rust, paint, tar, epoxy, paint, adhesives, etc.
from various materials such as steel, iron, concrete or stone.
The result is a sandblasted surface with the appropriate texture suitable for the application of a new protective coating.
Tercoo® provides the correct surface preparation for proper adhesion of new protective coatings.
How does Tercoo® work?.
Tercoo® is a natural rubber disc with 12 hard metal (tungsten carbide) tips (pins).
The tips are at a certain angle to the center of the disc.
During operation, the centrifugal force created by the rotational speed of the drill causes the flexible rubber disk to react in such a way as to create a ´´hammer effect´´ with the tungsten carbide tips.
This motion ensures that the tips clean the surface perfectly, removing all contaminants and other old coatings.
The hammer effect does not generate heat, so stubborn materials such as tar, adhesives and sealants will be easily removed.
This is a completely opposite concept compared to other tools.
Other tools use friction to remove contaminants (wire brush, etc.) which produce a lot of heat and work ineffectively with bitumen, tar, adhesives, tectil, etc.
based products.
In other words, no matter what the coating, Tercoo® is always clean.
Use and safety.
ALWAYS wear goggles, work gloves, dust masks and protective clothing.
Maximum speed 4000 rpm.
Optimal speed between 2500 and 3000 rpm.
DIRECTION = clockwise.
The disc should never be used on:
EDGES, HIGH SURFACES, etc.
